Carboxymethyl cellulose, Polyoxyethylene (20) stearylether,
Water,Glycerin,Lanolin alcohol,Coconut fatty acid diethanolamide,1.2 Propanediol,Potassium
chloride,Sodium Chloride,Polyxoyethylene(20)sorbitol,Methylparaben,and Propylparaben.
For use in neuromonitoring procedures in conjunction with
electrodes.Use a bell shaped cup electrode with the hole in the
center.Apply just enough paste inside of the EEG electrode to very
slightly overfill the cup. Place the electrode onto the electrode
site and press with medium pressure. A small amount of paste may
come out the hole.Pressing too hard will cause all of the paste to
come out and electrode will not adhere well. Clean with warm water.
Store the paste in a cool place away from direct sunlight. Tighten
the cap to prevent paste from drying. Do not use dried paste
because the EEG waveform cannot be recorded.
EEG Electrode paste with low impedance highly conductive gel,
specially formulated to stick the electrodes on the skin without
additional adhesive disks.
Used with all surface applied electrodes.
Shelf life is 2 years unopened
6 months after opening
Applicable Instruments: All EEG and EP/EMG Instruments.
|skin prepare gel||BD-P1||4oz/124g||1 pc|
|skin prepare gel||BD-P2||500g||1 pc|
|conductive gel||BD-C1||500g||1 pc|
|conductive gel||BD-C2||1000g||1 pc|
|conductive paste||BD-P8||250g||1 pc|